Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Chimney Repair for Yonkers Homeowners
Yonkers Chimney Repair typically runs between $400 and $4,800 depending on what the camera finds when we get inside the flue. The honest answer is that you won’t know which end of that range you’re on until someone actually looks. We’ve been doing Level 2 camera inspections as our default since 2009, and we’ve completed more than 38,000 chimney inspections and cleanings across Westchester and the surrounding area. Every single one included a written price before work started. When you call (551) 212-3526, you’re booking a real inspection with a documented photo record, not a flashlight glance and a guess.
Corrine Halstead runs Level Two Chimney Yonkers, and the standard she works to is the one our name references: NFPA 211 Level 2, camera down the flue, written scope, written warranty. If you bought your home in the last ten years and the inspector never put a camera up the chimney, you don’t actually know what condition the liner or the mortar joints are in. We show you. Call (551) 212-3526 and we’ll put it on the calendar.
What Our Chimney Repair Service Includes
The phrase “chimney repair” covers a lot of ground in Yonkers, because the housing stock varies so much. A 1920s colonial in Park Hill and a 1990s raised ranch in Crestwood fail in different ways. Here’s what we fix, and what each repair actually involves.
Mortar Repointing
Mortar Repointing means cutting out deteriorated mortar joints and packing fresh mortar in. In Yonkers, where freeze-thaw cycles hit brickwork hard from November through March, mortar erodes faster than most homeowners expect. You’ll see it as crumbling or missing joints between bricks, usually on the upper third of the chimney where wind exposure is worst. We match the existing mortar by color and composition, because a mismatched joint looks wrong and can trap moisture differently than the original mix. Our repointing work is done with the right mortar strength for the brick’s age, and it’s documented with photos before and after.
Spalling Brick Repair
Spalling Brick Repair is what happens when water gets into a brick, freezes, and pops the face off. You’ll notice brick faces lying in the gutter or on the roof, or you’ll see flaking, chipped brick surfaces with the inner clay exposed. This is serious because every spalled brick is one that’s no longer shedding water. We replace spalled bricks with matching units, and we address the moisture source that caused it. In neighborhoods like Lawrence Park and Cedar Knolls, where chimneys sit partially shaded, spalling tends to cluster on the north face.
Chimney Waterproofing
A chimney is a masonry sponge if it’s not sealed. Yonkers gets roughly 50 inches of rain and snowmelt per year, and that water works its way into the masonry and freezes. We apply vapor-permeable waterproofing treatments that keep liquid water out while letting the masonry breathe. This isn’t paint, which traps moisture and accelerates spalling. The right product, applied after the masonry is clean and any repairs are complete, is one of the cheapest things you can do to avoid a $3,000 rebuild later.
Flashing Repair
Flashing is the metal or rubber transition where the chimney meets the roof, and it’s the single most common leak point we find in Yonkers homes. When flashing fails, water follows the chimney down into the attic and often presents as a stain on a ceiling far from the chimney itself. We repair or replace step flashing, counter-flashing, and base flashing depending on what’s failed. Our flashing work is done to the roof deck and sealed with product rated for the Hudson Valley’s winter cycles, and we photograph the completed work before we come down the ladder.
Chimney Rebuilding
Sometimes the masonry above the roofline has gone too far for patch repair. When the crown, the top courses, and the mortar joints are all failing together, rebuilding is the right call. We rebuild chimneys from the shoulder up, using new brick matched as closely as possible to the original. A rebuild is a big job, but it’s also the last repair that chimney will need for decades if it’s flashed and waterproofed correctly. We show you the camera footage from inside the flue before we recommend it, and we tell you plainly when a rebuild can wait another season.
Tuckpointing
Tuckpointing is often confused with repointing, and the difference matters. True tuckpointing is a cosmetic technique that uses two colors of mortar to create the illusion of thin, crisp joints on older brickwork. In practice, most Yonkers homeowners who ask for tuckpointing need repointing, and we’ll tell you that directly. If your brick was originally built with tuckpointing and you want to preserve that historic look, we do that too. The camera inspection tells us whether the issue is structural or cosmetic, and the written quote tells you exactly which one you’re paying for.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Chimney Repair
We work with liners, caps, and repair systems from HeatShield, and we’ve completed thousands of HeatShield cerfractory flue repairs since the product became available. A HeatShield repair resurfaces a damaged clay tile liner without requiring a full teardown, which matters in Yonkers where many chimneys are internal and inaccessible from the outside. We’re certified to apply the HeatShield system, and every application is backed by our own 365-Day Done Right Promise in addition to the manufacturer’s warranty.
We also work extensively with Gelco and Olympia Chimney products for caps, chase covers, and termination systems. In the newer townhome developments around Ridge Hill and along Central Avenue, we see a lot of prefabricated and wood-framed chases that need Gelco or Olympia replacement parts. We stock common components from these manufacturers, which means fewer return trips and a faster repair for you. Whether you’ve got a masonry chimney, a factory-built unit, or a venting system from any other make, we can diagnose and repair it.
BeforeAfterSigns You Need Chimney Repair Right Now
- Water staining on the ceiling or walls near the chimney. This means water is entering somewhere in the chimney system, usually flashing or a failed crown. By the time a stain shows on sheetrock, the leak has been active for a while. The fix is almost always less expensive than the drywall repair, mold remediation, and structural work that follow if you wait.
- Crumbled mortar or brick fragments on the roof or ground. Spalling and failed mortar mean the chimney is actively degrading from freeze-thaw cycling. Each piece that falls off is material that was protecting the structural core. The next piece to fail could be a brick that lets a whole section shift.
- Smoke smells in the house even when you haven’t burned recently. This typically points to a cracked flue liner, which also means exhaust gases have a path back into your living space. A cracked liner is both a fire risk and a carbon monoxide path. It needs a camera inspection to confirm, and it’s not a repair to put off.
- Visible cracks in the chimney crown or missing mortar caps. The crown is the concrete slab on top that sheds water away from the flue. When it cracks at the flue joint, which they almost all eventually do, water pours straight down the inside of the chimney and wicks into the masonry. Crown repair is fast and relatively affordable, and it prevents far more expensive damage below.
- White staining on the exterior brick. That’s efflorescence, and it’s salt deposits being left behind as water evaporates out of the brick. It means water is inside the masonry, and it’s a leading indicator of spalling. If you catch it at this stage, waterproofing after repair solves it. If you don’t, the brick faces start popping.
Our Chimney Repair Process - Step by Step
We built this process around Clause 4 of the Haven Standard: a documented photo record on every job, every time. Here’s what happens when you call.
- 1
You speak to a live person, and we book the visit. Our office is staffed 24/7, which means someone answers when you call at 9 a.m. on a Saturday or 11 p.m. on a Tuesday. We confirm your address, ask a few questions about what you’re seeing, and give you a window for arrival.
- 2
The tech arrives, and you get a named professional, not a mystery crew. Every Level Two Chimney Yonkers technician is background-checked and uniformed, with their license information available on request. You’ll get a text when they’re on the way, and they’ll introduce themselves before touching anything.
- 3
We run a Level 2 camera inspection, and you watch the screen with us. This is the whole point. We don’t disappear onto the roof and come back with a verdict. You see the flue lining, the smoke chamber, and the crown on the camera feed in real time. We explain what we’re seeing using the trade’s real vocabulary: liner condition, creosote class, mortar joint integrity. And we define each term in plain language as we go.
- 4
You get a written scope and a written price before any repair begins. Clause 1 of the Haven Standard: no-hassle upfront pricing, always in writing. The quote names the exact work, the exact materials, and the exact price. Not an estimate range, not a ballpark. The number is the number. If you have a written quote from another company, we’ll give you a free second opinion on it.
- 5
We do the work, then hand you the documented record. When the repair is complete, you get the full photo record: before, during, and after. That’s Clause 4, and it’s been our standard on every job since 2009. If anything isn’t done right, you’re covered by the 365-Day Done Right Promise. We make it right or you don’t pay for that portion of the work.
How Much Does Chimney Repair Cost in Yonkers?
A typical mortar repointing job on a standard Yonkers chimney runs $600 to $1,400 depending on the area that needs work and the chimney’s height above the roofline. Flashing repair usually lands between $450 and $950. Chimney waterproofing after prep and minor repair is typically $500 to $900. Crown repair or rebuilding runs $800 to $2,200. A full chimney rebuild above the roofline starts around $3,500 and can reach $6,000 for larger or harder-to-access structures. Liner repair using HeatShield’s cerfractory system typically runs $2,500 to $5,500 depending on the flue’s size and condition.
What affects the price more than anything is access. A steep roof in North Yonkers, a chimney over three stories, or a flue that’s inaccessible from the interior all add labor time, and labor is the bulk of how much Chimney Repair costs. Materials matter too, but we source from Famco, Gelco, Olympia Chimney, and HeatShield through the Haven buying network specifically to keep material costs from inflating customer prices.
The way to avoid overpaying is to demand a camera inspection before accepting any quote. If a company quotes a rebuild without putting a camera up the flue, the quote isn’t based on evidence. We show you exactly what the camera sees, and we give you a written price that names the work and the materials. If the repair can wait, we say so in writing, and we tell you what to monitor. That’s the whole job.
Chimney Repair Near Yonkers - Our Service Area
We serve Yonkers and the surrounding communities, including home base calls from Riverdale, Kingsbridge, and Morris Park in the Bronx, Scarsdale and New Rochelle to the north, and Eastchester and Mount Vernon to the northeast. Across the river, we work regularly in Tenafly, Dumont, Englewood, and Bergenfield. Most repair visits in Yonkers are scheduled within the same week, and inspection appointments are generally available within 48 hours. If you’re in one of these communities and you’ve been told you need chimney work, see our Chimney Repair in Yonkers page for local pricing context, or check our Chimney Repair in Mount Vernon and Chimney Repair in Eastchester pages for area-specific details.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Chimney Repair in Yonkers
Chimney repair is any work that restores the structural, water-shedding, or venting function of your chimney. In Yonkers that most often means repointing failed mortar, replacing spalled brick, fixing flashing, repairing or replacing the crown, waterproofing the masonry, or repairing the flue liner. At Level Two Chimney Yonkers, every repair starts with a Level 2 camera inspection so the repair is based on what’s actually wrong inside the flue. You get the written scope and written price before any work begins.
Most repointing, flashing, crown, and waterproofing jobs are completed in a single day. A liner repair using HeatShield typically takes one day as well, with a cure time before burning that varies by application. A full chimney rebuild runs three to five days depending on weather and chimney size. We’ll give you a clear timeline in the written quote, along with the documentation you’ll receive when the work is done. Call (551) 212-3526 to book an inspection and get a real timeline for your specific chimney.
Chimney repair in Yonkers ranges from about $450 for minor flashing work to $6,000 or more for a full rebuild above the roofline. Most common repairs like repointing, crown repair, and waterproofing fall between $500 and $2,000. The exact price depends on chimney height, roof pitch, access, and what the camera inspection reveals. You’ll receive a written price before any work starts, so there’s no ambiguity about what you’re paying. Call (551) 212-3526 for a free estimate with camera documentation included.
Yes, we’re certified to apply HeatShield’s cerfractory flue repair system, and we’ve been using it on Yonkers homes for years. It’s often the right choice when a clay tile liner is cracked but the chimney structure is still sound. We’ll show you the cracked tiles on the camera feed so you can see the damage yourself before deciding. The repair is backed by our 365-Day Done Right Promise in addition to the manufacturer’s warranty.
Our phones are answered by a live person 24 hours a day, 7 days a week, so you’ll reach someone when you call, not a voicemail. We prioritize truly urgent situations like active leaks into the home or a liner failure that’s sending exhaust gas into the living space. We can usually get a technician out for an assessment quickly in those cases. Call (551) 212-3526 and describe what you’re seeing, and we’ll tell you honestly how urgent it is and when we can get there.
Every repair we complete is covered by the 365-Day Done Right Promise. If it’s not done right, we make it right. The specific terms are in writing, along with your written scope and written price, before any work begins. You’ll also receive the documented photo record of the completed work, which is required under Clause 4 of the Haven Standard and has been our standard practice on every job since 2009.
You don’t need to do much. Clear a path to the fireplace or stove, and if you have furniture or rugs near the hearth, pull them back a few feet so our tech has room to work. If you have pets, it helps to keep them in another room while we’re working. We bring drop cloths and tarps to protect your floors and furnishings, and we’ll handle everything else, including the cleanup. The tech will walk you through what they found and what the repair involves before anything starts.
Schedule Your Chimney Repair Service in Yonkers Today
If you’ve seen water stains, spalling brick, or mortar dust in the firebox, the next step is a camera inspection, not a guess. Call (551) 212-3526 to book your Level 2 inspection and get a written price from Corrine Halstead and the Level Two Chimney Yonkers team. We answer the phone 24/7, the estimate is free, and no work begins until you’ve seen the evidence and approved the written scope. We’re ready when you are.
Written by Corrine Halstead, Owner at Level Two Chimney Yonkers, serving Yonkers since 2009.