Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFamco Fireplace Services in Yonkers: What to Know First
Famco fireplace services in Yonkers typically run $180 to $390 for a full inspection and cleaning, depending on the fireplace type and how long it’s been since the last service. Most repairs fall between $245 and $2,900, and we complete the majority of Famco jobs in one visit. The price you’re quoted before work starts is the price you pay, written down, with a documented photo record included on every job.
This page is for homeowners in Yonkers who own a Famco fireplace, insert, or log set and want straight answers about servicing it. If you’ve got a Famco unit that’s been making a clicking sound while the pilot is lit, or you pulled the cover off and saw rust, we’ll explain what that means and what it costs to fix. Call (551) 212-3526 and we’ll give you a free estimate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Famco Products Fail - and How We Fix Them
Famco builds solid units, but they’re not immune to the two things every Yonkers fireplace fights: humidity off the Hudson and years of deferred maintenance. Here’s what we actually see on service calls:
- Famco direct-vent gas inserts with thermocouple failure. The pilot lights, you hold the knob, and it dies the second you let go. This happens when the thermocouple has been cooked by a dirty burner, something we see frequently in Famco inserts installed in the 2005-2015 range. We test the millivolt output, then replace with an OEM-spec part or a quality aftermarket equivalent depending on what makes more sense for the unit’s age.
- Famco vented gas log sets with clogged burner ports. Yellow flames turn lazy and orange, and you smell gas that isn’t igniting cleanly. It’s almost always corrosion inside the burner tube, not a gas line problem. We pull the logs, brush the ports with a wire tool, and confirm the flame pattern matches what the Famco manual specifies. Dirty ports left alone will crack the ceramic logs eventually.
- Famco wood-burning fireplaces in older Yonkers homes with crackled firebrick. Brick panels that sound hollow when tapped or show hairline cracks are letting heat into the masonry behind them. In homes along the Park Hill and Crestwood neighborhoods, we’ve seen fireboxes where years of burning green wood have caused the refractory panels to degrade faster than the damper assembly. We replace panels with heat-rated refractory material and re-point the mortar as needed.
- Famco fireplace dampers that won’t stay open. The handle spins freely, or the throat damper plate is rusted in the open position. We see this in Yonkers homes where chimney caps were missing for a season and water ran straight down the flue onto the damper frame. We inspect the damper assembly, replace what’s failed, and if water entry was the root cause, we’ll say so before recommending a cap or crown repair.
- Famco glass doors with warped frames on prefab units. The glass won’t seat, hot air leaks into the room, and the gasket is compressed flat. This is an installation-temperature problem more than a manufacturing flaw, and it’s common in row houses and split-levels across Yonkers where the fireplace sits on an exterior wall. We re-shim the frame, replace the gasket, and test the door’s air seal with a smoke pen.
Our Famco Fireplace Services Process
Every Famco job follows the same sequence, whether it’s a cleaning in a Glenwood ranch or a firebox repair in a Bryn Mawr colonial:
- 1
You call (551) 212-3526, a live person answers. No voicemail, no web form. We ask what you’re seeing, what the unit does, and what the last service was if you know it. We schedule a window that works around your day and text you a confirmation.
- 2
We arrive on schedule, uniformed, with a named tech on the job. Corrine or one of our senior technicians introduces themselves, puts down drop cloths, and starts with the evaluation. Clause 4 of the Haven Standard means the camera runs before and after every job, no exceptions.
- 3
We run a Level 2 camera inspection down the flue. On a Famco insert, that means pulling the logs, inspecting the burner, the gas valve, the thermocouple, the firebox refractory, and the interior of the liner. You see the footage with us. If there’s a crack, you’ll see it, not just hear about it.
- 4
We make a parts decision with you. If the unit is under Famco’s warranty, we tell you what that covers and what it doesn’t. If it’s out of warranty, we lay out OEM versus quality aftermarket options, with the price difference on paper before you choose. We never upsell a part you don’t need, and we never recommend a liner replacement without camera evidence you’ve watched yourself.
- 5
We do the work, then test it in front of you. Gas units get a full ignition cycle, flame-pattern check, and carbon monoxide reading at the firebox opening. Wood-burning units get a draft test before you ever light a fire. You get a written scope with the price, a written warranty on the work, and a documented photo record showing exactly what was done.
- 6
We leave the space cleaner than we found it, and the 365-Day Done Right Promise applies. If something isn’t right, you call and we make it right. That’s the entire point of putting it in writing.
BeforeAfterWhat Famco Fireplace Services Costs in Yonkers
We name prices. Here’s what Famco work typically runs in Yonkers, based on the jobs we’ve done in the last few years:
- Famco gas insert cleaning and Level 2 inspection: $220-$310 (includes camera footage and photo record)
- Famco vented gas log set cleaning and burner service: $180-$250
- Thermocouple or thermopile replacement: $245-$390 (part included)
- Firebox refractory panel replacement: $480-$820 depending on firebox size and how many panels need to come out
- Damper replacement or repair: $310-$550
- Full Famco fireplace rebuild with liner: $2,400-$2,900 for a typical single-story Yonkers home, more if the flue runs through multiple stories or the crown needs extensive work
What moves the price: unit age, parts availability for that series, firebox condition, and how much clearance work is involved. You’ll always get a written price before any work starts, and the scope is written in plain English. Estimates are free. Call (551) 212-3526 and we’ll give you a number on the phone and in writing.
Why Yonkers Homeowners Call Level Two Chimney Yonkers for Famco Work
We’ve been running compliance work in Yonkers under the Haven Standard since 2009, and 38,000-plus inspections have taught us one thing: homeowners don’t need more promises. They need evidence. Every Famco job gets a camera run before and after, a written price before we touch anything, and a photo record you can keep. The 365-Day Done Right Promise means if we miss something or the repair doesn’t hold, we come back and make it right at no cost.
Our technicians know Famco’s quirks because they’ve fixed hundreds of them, not because they read a manual. When a Famco part is backordered or discontinued, we source what works from DuraFlex, HeatShield, and Gelco through our buying network, and we’ll show you the price difference in writing before you decide. You get a live person on the phone 24/7, a named tech on the way, and a quote that doesn’t change after we’re in your living room. As an independent Famco service provider, we’re not tied to a manufacturer’s upsell path. We work for you.
Famco Fireplace Services FAQs
Will servicing my Famco fireplace void the warranty? No, not when it’s done correctly. Scheduled cleaning and inspection don’t void a Famco warranty. What voids warranties is improper installation or DIY repairs that alter the unit. We document every visit with photos and a written record, which actually helps you if a warranty claim comes up.
Can you get Famco parts in Yonkers, or do I have to wait weeks? Most common Famco parts like thermocouples, gaskets, refractory panels, and damper assemblies are available quickly through our supplier network, and we keep high-failure parts stocked. Obscure pieces from discontinued series can take a few days. We’ll tell you the timeline before we order, and a written quote is free. Call (551) 212-3526.
How do I know if my Famco fireplace needs a repair or a full replacement? If the firebox is structurally sound and the gas valve passes a leak test, repair is usually the right move. If the firebox panels are crumbling, the burner is warped, and the flue liner is spalling, you’re looking at replacement-level money. The camera tells us which one you’re in, and we’ll show you the footage.
How fast can you get to a Famco fireplace in Yonkers? For cleaning and inspection, we can typically get you on the calendar within a few days. For safety issues like a gas smell, a cracked panel, or a damper jammed shut, we prioritize those calls and move them up. Call (551) 212-3526 and tell us what’s happening. A live person answers.
What actually happens if I skip a Famco fireplace cleaning? On gas units, the buildup causes incomplete combustion, which is where carbon monoxide comes from. On wood-burning units, creosote accumulates in the flue, and Class III creosote is a chimney fire waiting for a spark. The camera doesn’t lie, and neither does the quote. It’s cheaper to clean it now than to rebuild it later.
Written by Corrine Halstead, Owner, Level Two Chimney Yonkers at Level Two Chimney Yonkers, serving Yonkers and nearby areas.