Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Fireplace Services in Yonkers: What to Know First
We service Olympia Chimney fireplaces and related venting systems throughout Yonkers as an independent provider. Most service calls we run on Olympia Chimney equipment take one to two hours on site, and we write the full price on paper before anyone starts work. That means a gas fireplace that won’t light, an insert that’s sooting up, or rusting Olympia chimney pipe gets diagnosed with a camera, quoted flat, and fixed without a surprise at the end.
This page is for Yonkers homeowners who have an Olympia Chimney stove, insert, or venting system and want a service company that knows the product line well enough to name the problem and the number before asking for the job. If you want a written price, a documented photo record of the work, and a 365-day guarantee on the repair, call (551) 212-3526 and we’ll set it up. Corrine Halstead and the crew here handle these systems regularly, from the older wood stoves you still see in Yonkers colonials to the newer zero-clearance fireplaces going into renovations along the waterfront.
Key Takeaways
- We’re an independent Olympia Chimney service provider, not a factory warranty center, and we’ll say plainly when a repair makes sense versus a replacement.
- Every job gets a camera inspection before and after, a written price before work starts, and a photo record when it’s done.
- Typical Yonkers service calls run $195-$465 for diagnostics and common repairs; full liner or firebox rebuilds run higher and we’ll quote those in writing first.
- We service other venting brands too, including DuraFlex, HeatShield, and Gelco, so we’re not trying to sell you one parts path.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
Olympia Chimney has been making stainless and galvanized venting, stove pipe, and fireplace components for decades. The brand shows up in Yonkers homes in two main ways: older Olympia wood stove installations, and newer Olympia direct-vent and B-vent gas fireplace systems. We see specific failure patterns on each.
- Olympia double-wall stove pipe rust-through at the seams. On Olympia’s double-wall connector pipe, the inner liner is stainless but the outer jacket is often galvanized. In Yonkers, where humidity runs high and coastal air comes up the Hudson, we see the outer jacket corrode at the seam locks within eight to twelve years. The fireplace still drafts, so the homeowner doesn’t notice it until the pipe is visibly rusting or a camera inspection shows the inner liner crimps weakening. Our fix is replacement with a DuraFlex stainless liner or Olympia OEM pipe if it’s still available. We don’t patch rusted connector pipe.
- Olympia zero-clearance fireplace refractory panel cracking. The firebrick-style refractory panels in Olympia’s zero-clearance units crack along the back wall after repeated heating cycles, especially in Yonkers homes where people run the fireplace hard from October through March. A hairline crack is normal, but a piece the size of a fist shifting out of place is a fire hazard behind the facade. We replace the panel with an OEM or proper refractory spec, never floor brick, and we camera-scan the firebox before and after so you can see exactly what was replaced.
- Olympia B-vent gas pipe separation at the flue collar. On Olympia B-vent used for gas fireplaces, the twist-lock sections can work loose at the collar where the pipe enters the unit. We’ve seen this on older installations in Yonkers row houses where equipment vibration or settling has nudged joints apart. A separated joint means exhaust gases spill back into the room instead of going up. We fix it by reseating and securing the sections, then running a draft test and taking photos of the correction.
- Olympia stove damper assemblies freezing up. The cast-iron dampers on older Olympia wood stoves collect creosote and surface rust, and after a few years the handle gets stiff enough that homeowners stop using it. A frozen damper is not just an inconvenience, it means you can’t control the draft. We disassemble what’s serviceable, clean the linkage, and replace the damper plate if it’s warped or corroded through. If the firebox itself is still sound, fixing the damper usually buys you five or more years of use.
- Olympia direct-vent termination cap clogging with Yonkers soot and tree debris. The cap on an Olympia direct-vent fireplace sits outside your house, and in Yonkers neighborhoods with mature trees the cap screen clogs faster than people expect. A blocked cap causes sooting inside the glass and a lazy, yellow flame. We clean the cap, test the draft, and when the screen is too fine or too restricted for the way the fireplace is actually being used, we’ll show you that in the photo record and recommend a cap with better flow.
The pattern here is that Olympia makes solid equipment, but the weak points are the joints, the caps, and the things that bolt or lock together. Those are exactly the things a snap-the-glass-front-to-see-the-flame inspection misses. We put a camera down the flue and we show you what it found.
Our Olympia Chimney Fireplace Services Process
- 1
You call, a person answers. When you call (551) 212-3526, a live person picks up. You tell us what the fireplace is doing or not doing. We ask what Olympia product you have if you know, and we schedule the visit.
- 2
The tech arrives and runs a Level 2 camera scan first. Before anyone recommends a repair, the technician runs a NFPA 211 Level 2 inspection: camera down the flue from the top and bottom, inside the firebox, at the dampers, and at the termination. You see the footage on the spot. We tell you exactly what condition the system is in, in plain terms, not in adjectives.
- 3
You get a written price before any work starts. If the fireplace needs service, we write the scope, the price, and the warranty on paper and hand it to you before we touch a tool. This is Haven Standard Clause 1. If you don’t like the price, you’re not being pressured to approve it while the tech is standing in your living room.
- 4
We source the right parts, and we’ll say if OEM doesn’t make sense. For Olympia gas fireplaces and inserts, OEM parts are often the right call, but on an older Olympia wood stove, an aftermarket DuraFlex stainless liner can outlast the original pipe and cost less. We show you both options with prices. You decide, with full information.
- 5
The repair happens, the draft gets tested, and the camera goes back down. After we’re done, we run the system, light the fireplace, and verify the draft. Then we put the camera back down the flue and take a second photo set so you can see the completed work, not just hear about it.
- 6
You get the photo record and a 365-day guarantee. Every Olympia Chimney job in Yonkers ends with a documented photo record and the 365-Day Done Right Promise: if it’s not done right, we make it right. That’s the standard we’ve held since 2009, and it’s stamped on every job under the Haven Standard.
BeforeAfterWhat Olympia Chimney Fireplace Services Costs in Yonkers
Most Olympia Chimney service calls in Yonkers fall into ranges we can quote on the page, because that’s the point. A diagnostic visit with the full camera scan runs $195-$285. Common repairs like replacing a thermocouple, cleaning and reseating a B-vent joint, or swapping out a refractory panel typically land between $285 and $465, parts and labor included. A full stainless liner installation on an Olympia wood stove system runs $1,850-$3,300 depending on the flue height and access. A complete firebox rebuild or a direct-vent fireplace replacement runs higher, and we write that quote out line by line before you commit to anything.
| Olympia Chimney Service | Typical Yonkers Price Range |
|---|---|
| Level 2 camera diagnostic | $195-$285 |
| Common repair (thermocouple, joint, refractory panel, damper) | $285-$465 |
| Stainless liner replacement (wood stove or fireplace system) | $1,850-$3,300 |
| Firebox rebuild or fireplace replacement | Written line-item quote |
What moves the price is access: if your Yonkers home has a steep roof pitch or a chimney that’s hard to reach from the ridge, that adds scaffold time. If the flue hasn’t been cleaned in years and we’re also removing heavy creosote buildup, that’s a separate line item you’ll see in writing. Call (551) 212-3526 for an exact written quote, always before work starts, no exceptions.
Why Yonkers Homeowners Call Level Two Chimney Yonkers for Olympia Chimney Work
Most Yonkers homeowners don’t care how long a company has been around. They care whether the person standing in their living room can show them what’s wrong and put the fix on paper before starting. We’ve been doing camera-documented chimney work since 2009, across more than 38,000 inspections and cleanings, and every single one has run the same way: camera before, written price before work, photo record after.
We service Olympia Chimney equipment along with DuraFlex, HeatShield, and Gelco lines, which means we’re not pushing one brand of parts because it’s all we can get. We’re background-checked, uniformed, and we answer the phone 24 hours a day. Corrine Halstead, the owner, grew up in the Bronx and has spent two decades in chimneys across Westchester County, including Yonkers homes along the Hudson River Museum corridor. The camera doesn’t lie, and neither does the quote.
FAQs
We’re not a factory warranty center. As an independent Olympia Chimney service provider, we diagnose the problem, fix it with the right parts, and give you our own 365-Day Done Right Promise. If your Olympia product is still under a manufacturer’s warranty, we can document the issue with photos and written findings you can submit to Olympia directly. Call (551) 212-3526 with your model number and we’ll tell you what’s practical.
OEM Olympia parts, especially for older stove models, can take a week or more to source, and some are discontinued. We maintain access to Olympia distribution plus aftermarket options from DuraFlex, HeatShield, and Gelco, which means we’ll tell you honestly if a NOS OEM replacement is worth the wait or if an equivalent aftermarket part does the same job for less. We don’t make that call for you; we quote both and you decide.
If the firebox itself is solid and the flue is structurally sound, repair usually makes sense for five or more years of additional use. If the firebox has cracked through or the connecting pipe is rusted at the seams in multiple places, replacement is the better call, and we’ll show you the photo evidence either way. Call (551) 212-3526 for a camera inspection and we’ll put the repair number and the replacement number side by side in writing.
We schedule most Yonkers service calls within a few business days, and the on-site work for a typical Olympia Chimney fireplace service runs one to two hours. Larger liner or firebox work is usually scheduled a week or two out. We’ll give you the timeline in writing when we quote the job, not after you’ve committed to it.
If it’s a wood system, you’re likely building up creosote, which is a chimney fire risk, especially in Yonkers where fall through spring burning is continuous. If it’s a gas system, small joint leaks and cap clogs let moisture and soot work their way through the venting over time. A camera inspection answers the question directly: we’ll tell you if the unit can safely wait another season or if it needs attention now. Call (551) 212-3526 and we’ll look before we tell you to spend anything.
Written by Corrine Halstead, Owner, Level Two Chimney Yonkers at Level Two Chimney Yonkers, serving Yonkers and nearby areas.