Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Scarsdale
Chimney repair in Scarsdale is a different job than it is almost anywhere else in Westchester. Most of the village’s homes were built between 1920 and 1940, which means the chimneys are approaching a century old, and a typical property will have two or three flues stacked in a single masonry chase rather than one. What looks like a simple repointing job usually turns out to involve original clay-tile liners, shared flue configurations, and brick that has been spalling quietly for decades.
We know that because we work in Scarsdale every week. Our Chimney Repair team understands what these pre-WWII stacks look like from the inside, and we never recommend a repair without camera footage of the flue showing exactly what we found. If you’re seeing spalled brick on the chimney face, water staining on the ceiling near the fireplace, or mortar that’s turning to sand, call us at (551) 212-3526. Every quote is written, priced, and scoped before any work starts.
Why Level Two Chimney Yonkers Is Scarsdale’s Preferred Chimney Repair Company
Scarsdale homeowners tend to research heavily before hiring anyone, and they’re right to. The village’s older housing stock attracts aggressive chimney contractors who see a Tudor Revival with surface spalling and immediately quote a full rebuild, often landing in the five figures without ever putting a camera down the flue. We’ve been called in for a Free Second Opinion on more of those written quotes than we can count, and the homework usually shows a liner in decent condition with a straightforward repointing job needed.
We are the company that made NFPA 211 Level 2 camera-scan documentation the default on every job back in 2009, years before insurance carriers or code officials started asking for it. That practice became Clause 4 of the Haven Standard, which governs how every one of our 38,000-plus inspections and cleanings has been conducted. You walk away with photos, camera footage, and a written record of your chimney’s condition, not a verbal summary you have to trust. Our techs are background-checked, uniformed, and a named technician texts you when they’re on the way to your Scarsdale property.
We’re not a franchise office with rotating crews. Level Two Chimney Co. is independently owned and operated under the Haven Standard, with our New York City office coordinating dispatch and scheduling for crews that serve Scarsdale locally. Corrine Halstead has built the operation around a simple rule: show the customer what you found, name the price in writing, and stand behind it. That’s the 365-Day Done Right Promise, stamped on every job.
Our Chimney Repair Services in Scarsdale

These are the four repair services we perform most often in Scarsdale. Each quote includes the camera-scan documentation, the written scope, and the price before we start.
Mortar Repointing
Scarsdale’s 1920s and 1930s brickwork was laid with lime-based mortar that is now crumbling in the freeze-thaw cycles Westchester delivers every November through March. Repointing removes the deteriorated mortar joints and replaces them with a matching mix so the brick doesn’t shift or let water in. On Fox Meadow and Heathcote Tudors, where the original brick is soft and prone to spalling, using the right mortar hardness matters more than most contractors acknowledge. A mortar that’s too hard will crack the brick before the joint does.

Spalling Brick Repair
Spalling is when brick faces flake, pop, or fall off entirely, usually because absorbed water has frozen and expanded inside the brick. We see it constantly on Scarsdale chimneys that sit under dense tree canopy, where leaf debris holds moisture against the masonry through the autumn. Where the spalling is localized, we cut out the damaged brick and replace it with matched units. Where it’s widespread, we’ll tell you plainly and show you the camera footage before recommending anything broader.

Chimney Waterproofing
The village’s older chimneys, especially those built with fieldstone or soft 1920s-era brick, absorb water readily. A breathable waterproofing treatment works by keeping liquid water out while letting water vapor escape from inside the masonry. It’s a fraction of the cost of a rebuild and often buys years on a chimney that’s structurally sound but getting damp. After a wet autumn, this single step fixes what many Scarsdale homeowners have attributed to roof leaks for years.

Flashing Repair
Flashing is the metal that seals the joint where the chimney meets the roofline, and on Scarsdale’s steep slate and tile roofs it takes a beating. Old copper flashing corrodes, step flashing pulls away from the brick, and water follows the gap down into the attic, presenting as a ceiling stain nowhere near the fireplace. When a Heathcote client reports an attic leak with a brand-new roof, our first suspect is flashing, and the camera usually proves it. We install new flashing and counter-flashing with the proper overlap, then seal the intersection so water can’t find a path.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Scarsdale
We install and repair products from DuraFlex, HeatShield, and Olympia Chimney, sourced through Haven’s buying network to keep our Scarsdale pricing honest. DuraFlex stainless liners are our standard recommendation for oil-to-gas conversions because they handle the acidic condensate modern high-efficiency boilers produce. For smaller liner repairs, HeatShield’s cerfractory sealing system sometimes eliminates the need for a full replacement. Because we stock these materials in volume, most Scarsdale repair jobs are completed in a day, start to finish.
Common Chimney Repair Problems We See in Scarsdale Homes

- Surface spalling without structural damage. Contractors see flaking brick on a Fox Meadow Tudor and quote a full rebuild. The camera often shows the flue itself is intact, and repointing plus waterproofing is all that’s needed. We won’t recommend a rebuild we can’t justify with footage.
- Shared flues overlooked during repairs. Many Scarsdale homes have two fireplaces plus a furnace or boiler venting into a single stack with separate clay-tile flues. A repair to one firebox can leave the other venting into a compromised liner. We flag every shared-flue configuration before touching a brick.
- Oil-to-gas conversions without the required liner upgrade. Westchester County and New York State both require flue relining when a chimney’s use changes. Skipping the liner lets acidic condensate eat through original clay tiles within two heating seasons. This is the most common code compliance item we find in Scarsdale.
- Water infiltration misdiagnosed as a roof leak. Dense tree canopy, heavy autumn leaf debris on caps and flashing, and porous century-old masonry combine to push water into attic spaces. The chimney sweep is often the first person to correctly diagnose what a roofer already charged to miss.
Pricing for Chimney Repair in Scarsdale, NY
Here are the ranges we’re quoting in Scarsdale right now, depending on the condition we find and the access required:
- Mortar repointing (partial chimney): $850-$1,900
- Full chimney repointing (all four sides): $3,200-$6,500
- Spalling brick replacement (per brick zone): $350-$900
- Chimney waterproofing treatment: $500-$1,200
- Flashing repair or replacement: $600-$2,400
- Clay tile liner replacement with a DuraFlex stainless liner: $3,800-$7,200 depending on flue length and access
These are written ranges, not “call for a quote” teasers. The exact number depends on things like whether the chimney requires staging on a steep Scarsdale roofline, how many flues are actually in the stack, and what the camera scan reveals about the liner. We deliver the written price, written scope, and written warranty before any work starts. Call (551) 212-3526 for a free estimate with a camera inspection included.
We Also Serve Cities Near Scarsdale

In addition to our work in Scarsdale proper, our crews handle chimney repair throughout the lower Hudson Valley and Westchester. We regularly serve Chimney Repair in Scarsdale alongside jobs in Eastchester, White Plains, Yonkers, and New Rochelle. Most of these appointments are scheduled within a week, because our dispatch coordinates from the New York City office and routes crews efficiently across the county.
Serving Scarsdale, NY - Our Local Coverage Area
We’re based in the Scarsdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Scarsdale

Most likely yes. New York State code and Westchester County requirements treat an oil-to-gas conversion as a change in the chimney’s use, and the original clay-tile liners in Scarsdale’s 1920s and 1930s homes are not rated for the cooler, wetter exhaust modern gas boilers produce. The acidic condensate attacks clay tile quickly, and a compromised liner becomes a carbon monoxide risk. A camera scan tells us in minutes whether your existing liner can stay. We’d rather show you the footage than sell you a liner you don’t need. Call (551) 212-3526 and we’ll bring the camera.
Because the water is almost always entering through the chimney itself, not the roof. Scarsdale’s older chimneys, especially the fieldstone and soft-brick ones built before WWII, absorb water through porous masonry during autumn rains, then freeze and expand as the temperature drops. Flashing that’s lost its seal at the roofline is the other usual suspect. We’ve seen numerous Scarsdale homeowners pay for two new roofs while the chimney leaked through every one. A Level 2 inspection will find the path of entry and show it to you on camera. Call (551) 212-3526 for a free estimate with photo documentation.
Usually you can repoint and replace the spalled bricks, and a full rebuild is rarely necessary. The determining factor is not the surface condition of the brick but the structural state of the chimney, which we assess with a camera scan and a visual of the flue interior. Many Scarsdale homeowners get told they need a $15,000 rebuild when the actual scope is $2,000 of repointing, brick replacement, and waterproofing. We’ll show you the camera footage that justifies whichever recommendation we make. Call (551) 212-3526 for a straight answer.
Once a year, even if you burn once a month. The issue in Scarsdale is rarely creosote buildup from heavy use. It’s moisture. The village’s freeze-thaw cycles work on the mortar and brick year-round whether you light a fire or not, and a small crack that started in January becomes spalling brick by the following autumn. The National Fire Protection Association recommends an annual inspection regardless of usage, and with our camera-scan documentation you’ll have a dated record of your chimney’s condition from year to year. That record is part of every visit under Clause 4 of the Haven Standard.
Repointing stops water from entering through the mortar joints, which is where most moisture penetrates first on Scarsdale’s older brick chimneys. But it’s not a complete waterproofing solution if the brick itself is porous, the crown is cracked, or the flashing has pulled away. On a Heathcote Tudor we recently repaired, the fix required repointing the soft 1920s brick, installing a new DuraFlex liner, and rebuilding the crown before the water stopped completely. We’ll identify every path of entry, not just the obvious one, and give you a written price for each before we start. Call (551) 212-3526 and we’ll do the same for your house.
Call Level Two Chimney Yonkers for Chimney Repair in Scarsdale
If your Scarsdale chimney is spalling, leaking, or overdue for a look after an oil-to-gas conversion, call us at (551) 212-3526. You’ll get a live person, not a voicemail, and we’ll schedule a named technician with a camera who shows up in uniform and texts you when they’re on the way. The inspection is documented. The price is written before work starts. The warranty is part of the job, not a negotiation. That’s the Haven Standard, and it’s been our operating rule since 2009.
Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Scarsdale under the Haven Standard.





Before
After
Before
After