Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Englewood
If you own one of Englewood’s older homes, especially up in The Hill, you’ve likely wondered about the real condition of your chimney. Most Chimney Repair calls we get from Englewood start the same way: a homeowner smells smoke when the wind blows, sees water stains on the ceiling, or had a squirrel find its way in. We know these houses. We’ve been inside their flues. Call (551) 212-3526 and we’ll give you a written price before any work starts, backed by camera evidence you can actually see.
Why Level Two Chimney Yonkers Is Englewood’s Preferred Chimney Repair Company
Englewood’s housing stock isn’t uniform. The Hill’s 1920s mansions have nothing in common with the postwar ranches closer to Route 4, except that both need honest, documented repairs. Our crews work Englewood regularly. We don’t send a salesperson with a flashlight; we send a uniformed tech with a camera system, a written scope of work, and a copy of the Haven Standard checklist. Every inspection produces a documented photo record you keep, not a verbal “trust me.” It’s why customers on Hamilton Avenue, Knickerbocker Road, and down by Palisade Avenue keep calling us back.
Corrine Halstead leads our crews. She’s the one who reviews the camera footage before a single brick is touched. We answer the phone 24/7 with a live person, and our techs text you when they’re on the way. In Englewood, where so many flues are original to the house, that level of documentation is the only way to know what’s actually wrong. A three-flue stack can hide two problems you’ll never see from the ground. We show them to you.
Our Chimney Repair Services in Englewood
We don’t do “chimney work.” We do specific repairs, named clearly, priced in writing. Here’s what Englewood homeowners call us for most often, and why these particular jobs matter for these particular houses.
Mortar Repointing
A century of freeze-thaw cycling has done a number on Englewood’s masonry. The older stacks in The Hill lose their mortar joints from the top down. We remove cracked or crumbling joints and repoint with mortar matched to the original brick. No one gets a full rebuild recommendation without camera evidence showing why repointing alone won’t hold.
Spalling Brick Repair
Spalling is when brick faces crack and pop off, usually after water gets in and freezes. On Englewood’s pre-war brick, it’s common at the shoulders and the top courses. We cut out damaged brick and replace it with reclaimed material when possible. If the spalling is structural, you’ll see the photos and the written reason before we touch a trowel.
Chimney Waterproofing
Water is the enemy of every masonry chimney in Englewood, especially where the Palisades ridge channels northwest wind and rain against the upper streets of The Hill. We apply a vapor-permeable waterproofing membrane from Gelco or Olympia Chimney that lets the brick breathe while blocking water absorption. It’s not a coating. It’s a repair that prevents the spalling and cracking the climate here drives.
Flashing Repair
The toughest leaks to trace in Englewood are at the roofline, where original flashing has rusted or separated. We remove old flashing, install new step or counter flashing as the roof geometry demands, and document the finished seal with photos. If the water is getting in, it’s usually here or at the crown. We’ll show you which.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Englewood
We don’t stock cheap mystery parts. For Englewood jobs, we use materials from HeatShield, Gelco, and Copperfield, sourced through Haven’s buying network to keep your price honest. That means a DuraFlex stainless liner goes in with a written warranty, and a HeatShield resurfacing job carries the documentation that satisfies insurance inspectors. We don’t have to order from a middleman for Englewood houses; the parts are on the truck because we work these streets every week.
Common Chimney Repair Problems We See in Englewood Homes
- Clay tile liners cracked after a century of freeze-thaw: The original liners in 1920s Hill homes weren’t built for modern furnace output. Hairline cracks let creosote and carbon monoxide seep into wall cavities, and no amount of sweeping fixes that.
- Abandoned coal-era boiler flues left open inside the same stack: Many Englewood mansions converted from coal in the 1950s and never sealed the old boiler flue. It becomes a highway for wildlife and a hidden creosote collector that no single-flue sweep will ever see.
- Northwest downdrafts off the Palisades ridge: Homes on the upper streets of The Hill get wind cascading down the basalt ridge. A rusted or missing cap means smoke blowback and backdrafting whenever the wind shifts. Cap and damper condition isn’t optional here.
- Flashing leaks at the roofline after heavy Bergen County rain: Original galvanized flashing on pre-war roofs eventually separates from the brick. Water tracks down the interior wall, and the chimney gets blamed for what is actually a flashing repair.
Pricing for Chimney Repair in Englewood, NJ
You should know what things cost before you call. In Englewood, mortar repointing typically runs $800-$2,400 depending on the footage of exposed joints and the access from scaffolding. Spalling brick replacement runs $400-$1,200 per section. Chimney waterproofing runs $450-$950 for a standard flue, and flashing repair runs $600-$1,800 depending on how much of the decking we need to remove to get a clean seal. Those are written ranges, not “call for a quote.” We put the exact price in writing before any work starts, and Clause 1 of the Haven Standard requires it. A free second opinion on any competitor’s written estimate is always available. Call (551) 212-3526.
We Also Serve Cities Near Englewood
From Englewood, our crews are routinely in Tenafly, Bergenfield, New Milford, and Dumont. Same written-price policy, same camera documentation, same live phone support. If you’re in one of those towns, the drive is short and the standard is the same.
Serving Englewood, NJ - Our Local Coverage Area
We’re based in the Englewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Englewood
Most The Hill estates built between 1900 and 1940 ran separate flues for each fireplace plus a dedicated flue for the coal or oil boiler. When the boiler was converted to gas in the 1950s and 60s, the old boiler flue was often just abandoned in place. It’s still open inside the same stack. It needs to be identified on camera and either sealed or relined, depending on whether it’s sharing masonry with an active flue. Call (551) 212-3526 and we’ll run a multi-flue camera inspection so you can see exactly which flues are active and which are open holes.
Most original clay tile liners in Englewood’s older homes are cracked, offset, or spalled after decades of thermal cycling and water entry. You don’t repair a cracked clay tile; you replace it or resurface it. HeatShield can resurface a liner with a ceramic coating when the masonry structure is still sound. When the tiles are shifted or the smoke chamber is compromised, a DuraFlex stainless liner is the durable answer. We’ll never tell you it’s one or the other without showing you the camera footage first. Written price, written warranty, before we start.
The Palisades ridge channels northwest wind down onto Englewood’s upper streets, and that wind pressure overcomes a weak draft in seconds. The usual fix is a properly sized chimney cap or a draft-inducing damper, often a Copperfield top-mount damper. Sometimes a rusted cap removed years ago is the only problem. We’ll check the cap, the crown, and the flue size relationship to the fireplace opening. You get the diagnostic photos and a written repair option, not a guess.
Yes. That’s the entire reason our camera documentation standard exists. In Englewood, where masonry stacks are 80 to 120 years old, some companies see a cracked crown and quote a $15,000 rebuild. We’ll show you the mortar joints, the crown condition, and the liner on camera. If repointing will hold for another decade, that’s what we write. If it won’t, you’ll see the reason in the photos. We don’t recommend a rebuild unless the evidence supports it. Get a written price and a photo record either way.
We run a specialized camera down every flue in the stack, including the capped or walled-off one. Those abandoned coal-era flues in Englewood are frequently full of creosote, raccoon nests, and broken clay tile. On The Hill we opened a 1920s Tudor’s three-flue stack and found exactly that: a cracked clay tile liner and a raccoon nest above the smoke chamber in the abandoned boiler flue. We removed the nest, installed a DuraFlex stainless liner in the active flue, and sealed the unused flue with a Copperfield top-mount damper. That’s what inspection means. Call (551) 212-3526 for a free estimate with camera documentation on every visit.
Written by Corrine Halstead, Owner at Level Two Chimney Yonkers, serving Englewood, NJ.